Development of learning module to improve competency achievement in the department of civil engineering education in Indonesia

Rihab Wit Daryono(1*), Sunar Rochmadi(2),

(1) Universitas Negeri Yogyakarta
(2) Universitas Negeri Yogyakarta
(*) Corresponding Author

Abstract


The purpose of this study was to determine the process of preparation and feasibility of the Building Maintenance learning module in the Department of Civil Engineering in vocational high schools. This research is a research and development (R&D) study using the Four D (4D) model. The Building Maintenance learning module is validated by one material expert and one media expert and the Building Maintenance subject teacher. The module contains a title, introduction, learning, evaluation questions, UAS, answer key, and bibliography. The analysis shows that the learning module as a whole is very feasible to be used as a teaching material. The results of the analysis of the data obtained an average score from the material experts is  90.0% so that it belongs to the "very feasible" category, the average score from the results of the media experts is 74.194% so that it belongs to the "feasible" category, and the average score of the teacher is 88.46% so it is included in the "very feasible" category. Then it can be concluded that the Building Maintenance module is in the very feasible category.


Keywords


learning media; learning module; building maintenance; civil engineering; vocational high school

Full Text:

Fulltext PDF

References


Daryono, R. W., Yolando, A. P., Jaedun, A., & Hidayat, N. (2020). Competency of vocational schools required by construction industry in consultants’ supervisor. Journal of Physics: Conference Series, 1456(012057), 012057. https://doi.org/10.1088/1742-6596/1456/1/012057

Departemen Pendidikan Nasional Republik Indonesia. (2008). Teknik penyusunan modul. Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah Departemen Pendidikan Nasional.

Fakhri, A. A., & Munadi, S. (2019). The evaluation of industrial internship for vocational school of mechanical engineering in Tegal. American Journal of Educational Research, 7(11), 806–809. https://doi.org/10.12691/education-7-11-8

Fathia, N. F., Hanafi, I., & Rif’an, M. (2018). Development of microprocessor learning media using zilog z-80 for vocational school students of electronic engineering expert program. Jurnal Pendidikan Vokasi, 8(3), 238. https://doi.org/10.21831/jpv.v8i3.20795

Gao, Q. (2008). Study on the higher vocational and professional specialty ability module of “construction management.” International Education Studies, 1(3), 132–135. https://doi.org/10.5539/ies.v1n3p132

Husain, M. Y., Mustapha, R., & Malik, S. A. (2014). Review of measurement item of engineering students’learning environment: Confirmatory factor analysis. Journal of Technical Education and Training, 6(1), 42–56. https://publisher.uthm.edu.my/ojs/index.php/JTET/article/view/885

Joo, L. (2018). Vol. 1: The excellence of technical vocational education and training (TVET) institutions in Korea: Yeungjin College Case Study. International Education Studies, 11(7), 136. https://doi.org/10.5539/ies.v11n7p136

Lestari, I. (2013). Pengembangan bahan ajar berbasis kompetensi. Akademia Permata.

Majid, N. W. A., & Ridwan, T. (2019). Development of the traditional digital games for strengthening childhood’s verbal skill. Jurnal Pendidikan Vokasi, 9(1), 75–82. https://doi.org/10.21831/jpv.v9i1.22802

Manap, N., Hassan, N. S., & Syahrom, N. S. (2017). Preparation of vocational college graduates as skilled workforce in the local construction industry. Journal of Technical Education and Training, 9(2), 69–80. https://publisher.uthm.edu.my/ojs/index.php/JTET/article/view/1577

Muslim, S., Gitama, N. P., Suprianto, B., Rahmadyanti, E., & Kusumawati, N. (2018). Influence of learning media based on adobe flash professional to psychomotor domain learning outcomes on plc courses viewed from level of creative thinking student. Jurnal Pendidikan Vokasi, 8(3), 267. https://doi.org/10.21831/jpv.v8i3.21552

Pamungkas, S. F., Widiastuti, I., & Suharno, S. (2020). 21st century learning: Experiential learning to enhance critical thinking in vocational education. Universal Journal of Educational Research, 8(4), 1345–1355. https://doi.org/10.13189/ujer.2020.080427

Prayitno, S. H., & Jaedun, A. (2018). Authentic assessment competence of building construction teachers in Indonesian vocational schools. Journal of Technical Education and Training, 10(1), 91–108. https://publisher.uthm.edu.my/ojs/index.php/JTET/article/view/2081

Undang-Undang Republik Indonesia Nomor 20 Tahun 2003 tentang sistem pendidikan nasional, Pub. L. No. 20 (2003).

Putri, M. A., & Prodjosantoso, A. K. (2020). Improving critical thinking skills and scientific attitudes by using comic. Psychology, Evaluation, and Technology in Educational Research, 2(2), 69. https://doi.org/10.33292/petier.v2i2.13

Risnawati, R., Andrian, D., Azmi, M. P., Amir, Z., & Nurdin, E. (2019). Development of a definition maps-based plane geometry module to improve the student teachers’ mathematical reasoning ability. International Journal of Instruction, 12(3), 541–560. https://doi.org/10.29333/iji.2019.12333a

Sarwinda, K., Rohaeti, E., & Fatharani, M. (2020). The development of audio-visual media with contextual teaching learning approach to improve learning motivation and critical thinking skills. Psychology, Evaluation, and Technology in Educational Research, 2(2), 98. https://doi.org/10.33292/petier.v2i2.12

Soenarto, S., Amin, M. M., & Kumaidi, K. (2017). Evaluasi implementasi kebijakan Sekolah Menengah Kejuruan program 4 tahun dalam meningkatkan employability lulusan. Jurnal Penelitian Dan Evaluasi Pendidikan, 21(2), 215–227. https://doi.org/10.21831/pep.v21i2.17076

Sudaryono, S. (2013). Pengembangan instrumen penelitian pendidikan. Graha Ilmu.

Sugiyono, S. (2019). Metode penelitian kombinasi (Mixed method). Alfabeta.

Sukoco, S., Arifin, Z., & Wakid, M. (2014). Pengembangan media pembelajaran interaktif berbasis komputer untuk peserta didik mata pelajaran teknik kendaraan ringan. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(2), 215–226. https://doi.org/10.21831/jptk.v22i2.8937

Susanti, A., Murtini, W., & Harini, H. (2018). Development of web-based interactive multimedia for human-resource-management learning in vocational high schools. Jurnal Pendidikan Vokasi, 8(3), 300. https://doi.org/10.21831/jpv.v8i3.20364

Suyitno, S. (2016). Pengembangan multimedia interaktif pengukuran teknik untuk meningkatkan hasil belajar siswa SMK. Jurnal Pendidikan Teknologi Dan Kejuruan, 23(1), 101. https://doi.org/10.21831/jptk.v23i1.9359

Thiagarajan, S., Semmel, D. S., & Semmel, M. I. (1974). Instructional development for training teachers of exceptional children: A sourcebook. may be ordered from the Council for Exceptional Children.

Triyono, M. B., Trianingsih, L., & Nurhadi, D. (2018). Students’ employability skills for construction drawing engineering in Indonesia. World Transactions on Engineering and Technology Education, 16(1), 29–35.

Wicaksana, Y. D., Widoretno, S., & Dwiastuti, S. (2020). The use of critical thinking aspects on module to enhance students’ academic achievement. International Journal of Instruction, 13(2), 303–314. https://doi.org/10.29333/iji.2020.13221a




DOI: http://dx.doi.org/10.33292/petier.v3i1.54

Article Metrics

Abstract view : 129 times
Fulltext PDF - 16 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Psychology, Evaluation, and Technology in Educational Research

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Our Journal indexed by:

Psychology, Evaluation, and Technology in Educational Research
ISSN: 2622-5506

Creative Commons License
Psychology, Evaluation, and Technology in Educational Research is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Based on a work at http://petier.org/index.php/PETIER.

 

PETiER Stats